Chat with us, powered by LiveChat
Changes related to COVID-19: QMH will remain open to serve the needs of our essential business customers. For changes on operation and more information. CLICK HERE

speed up loading/unloading time with a custom dock platform

Project Location: San Diego, CA

Find out how a new docking platform empowered Jerome’s Furniture Distribution to do one day’s work in 43 minutes. 

Platform

Size:

38′ L x 10′ W x 48′ H

Access Ramp

Size:

8′ W x 30′ L

87% Improvement in loading/ unloading productivity

THE CHALLENGE

M
At their San Diego location, Jerome’s Furniture Distibution were not able to easily access their new merchandise, which was slowing down their productivity.
M
They needed a solution that would allow them to load their 53-foot trailers without blocking the building entrances as that was the current problem. 
M
They also needed to ensure that there would be no cross-contamination between the new, outgoing furniture and the incoming used furniture they had removed from their customers’ homes.

THE SOLUTION

N
QMH designed a loading ramp and dock platform combo 
N
After the site visit, QMH found that the area where the platform would be constructed was on a substantial slope with a 4 foot rise rather than a 3.5 rise as originally thought. Adjustments were needed to be made to ensure the working space was leveled and matched the height of the trailers.

“This is a game changer for us, this is going to make our eveyday business more efficient and alot smoother.”

Kahiau F.

Reverse Logistics Manager

Jerome’s Furniture Distribution is a California-based home furnishings store that sells and delivers furnishings to their customers. As an additional service, they will also remove old furniture from their customer’s homes. With high demand for both services, the outgoing and incoming inventory started to compete for dock space. As Jerome’s business grew, they knew they needed to expand their capacity.

When Jerome’s reached out to Quality Material Handling (QMH), they had a few different challenges. With their existing setup, they were not able to easily access their new merchandise, which was slowing down their productivity. Additionally, they needed to be sure that the loading of their 53-foot trailers would not block the building entrances.

Finally, Jerome’s had another unique request. Not only did they want to increase their loading dock capacity, they also needed to ensure that there would be no cross-contamination between the new, outgoing furniture and the incoming used furniture they had removed from their customers’ homes.

After an initial conversation with Jerome’s, QMH set to work to design a solution that would meet all of their needs. requirements. This began with a site visit to better understand the current field conditions and potential outcomes. When exploring options for platform and dock placement, QMH found that the area where the platform would be constructed was on a substantial slope with a 4ft rise rather than a 3.5 rise as originally thought. This required adjustments to be made to ensure the working space was leveled. . This required that the new platform be designed to match the height of the trailers — a total of 4 feet on the slope rather than 3.5 feet as originally thought — to make the working space level.

Within five days of the site visit, QMH submitted a proposal to Jerome’s. Two weeks later, the contract was finalized and QMH got to began work. QMH prefabricated many parts of the platform and ramp in their facility to expedite the onsite installation. Within three weeks of Jerome’s initial phone call to QMH, they had a new ramp and platform in place.

 The installation resulted in Jerome’s having a loading dock for incoming furniture that was separate from the outgoing new furniture, two extra loading docks, and a ramp used by forklifts and pedestrians for loading and unloading purposes. Jerome’s was also able to keep their driveway intact, only losing one parking space. Per the warehouse manager, tTheir productivity increased substantially. Work that used to take one day now takes just 43 minutes. ROI was realized within three months.

In our years of experience, QMH has learned that creativity and thinking outside the box to develop client solutions is the key to success. Understanding our clients’ needs as well as conducting site visits are also very important in mitigating issues that could arise.

Do you need assistance solving a tricky docking problem? There is no task too difficult when it comes to dock equipment. Give us a call — we’d love to help!

CONTACT OUR TEAM OF EXPERTS

QMH WILL DESIGN, MANUFACTURE AND INSTALL A CUSTOM SOLUTION FIT TO YOUR NEEDS. 

CALL US: (855) SEL- RAMP